WesternCE, LLC

To Order

 

 CALL

 

1.855.552.5352

 

Contact Us

 

WesternCE, LLC

 

Home

 

 

 

TEMPERATURE CONTROL

and

ENERGY MANAGEMENT

 

 

 

 

 

 

 

Fits inside

existing thermostats!!!

 

CPO-TS1 Series Limiters

TempStopper

Description

The TempStopper™ may be used for a variety of applications.  The most prominent is Thermostat limitation for reducing wasted energy use in heating applications for Multi-family apartments, hotels, motels, resorts, dorms, commercial buildings

The TempStopper™ is installed and concealed within the existing thermostat eliminating tampering by the room occupants.  In fact, occupants rarely even know the device is there.

Using TempStopper™ for thermostat limitation in apartments where “heating is included in the rent” or hotel rooms can drastically reduce the energy wasted by wild thermostat settings of guests and residents who have no con­cern for controlling utility costs.

In thermostat limitation applications, the Temp-Stopper™ can pay for itself many times over in a single heating season.

 

 

 

 

5 year warranty

 

Comfort2TL™

Economy Digital Temperature Limiting Thermostat

Ideal for apartments and vacation properties where heating and/or cooling is included in the rent.  If either heat or cool are not included in rent liability, then that limit does not need to be set.

The C2TL series thermostat allows the landlord to set the temperature to the limits he wants.  This allows you to use the same thermostat for both normal residential and elderly properties as well where more lenient limits may be required.

·         Dual Powered – Hardwire or Battery

·         Bright Blue Display Backlight

·         Separately Adjustable Landlord Temperature Setpoint Limits

·         Non-Volatile Memory Retains User Settings

·         Easy Access Front Battery Door

·         Separate Heat Pump O & B Terminals

·         Compressor Short Cycle Protection

·         Separate Heating and Cooling Setpoints

·         Three Level Low Battery Indication

·         Front Access Reset Button

·         F / C Switch

·         Gas / Electric Fan Switch

·         Mount to Horizontal Box

 

 

 

5 year warranty

 

Comfort2™ T-32-P

 

The T-32-P universal thermostat is a perfect mix of esthetics, intuitive operation and performance at an amazingly affordable price.  The T-32-P is compatible with most residential and commercial HVAC systems and is ideally suited for use with Comfort System™ zoning systems.

  • Manual or auto changeover
  • Programmable or non-programmable
  • Occupied & unoccupied settings
  • Remote occupancy override
  • Adjustable setpoint limits
  • Keyboard locks
  • Remote occupancy override
  • Adaptive recovery (optimized start)
  • Smart fan logic for commercial control
  • PIN Protected installer setup menus
  • Outdoor air temperature display
  • Hardwired 24 volts with non-volatile memory
  • Equipment compatibility
    • 1 Heat / 1 Cool
    • 2 Heat / 2 Cool
    • 2 Heat / 1 Cool Heat Pump
    • 3 Heat / 2 Cool Heat Pump
    • 2 Heat / 1 Cool Dual Fuel
    • 3 Heat / 2 Cool Dual Fuel
  • Large backlit display
  • Integrated Modbus Communications
  • Centralized control of all thermostats

 

 

 

      

 

Single Stage (1H/1C)        

Single Stage Heat Only

 

Non-Programmable Thermostat

With high and/or low temperature limitation

 

CPO-TP1 Series Limiting

TempPROOF™ Thermostats

Description

The TempProof™ thermostats may be used in any low voltage application.  The thermostat provides accurate temperature control and Thermostat limitation for reducing wasted energy use in heating applications for Multi-family apartments, hotels, motels, resorts, dorms, commercial buildings,

Using TempProof™ thermostats in apartments where “heating is included in the rent” or hotel rooms can drastically reduce the energy wasted by wild thermostat settings of guests and residents who have no con­cern for controlling utility costs.

In thermostat limitation applications, the TempProof™ can pay for itself many times over in a single heating season.

 

 

 

 

 

 

 

Water Management

 

 

 Submetering

 

 

Internet or Local

Submetering Data Acquisition

 

CaptureONE™

CPO-1N

Submetering / Alarm Software

 

“WIRELESS AUTOMATED METER READING

The CaptureONE Corporate, multi-site version (CPO-1N) may be located at the owner’s corporate office.  In this case, Monitrol remote serial servers or client software is located at the monitored site, and all monitoring is in real-time via the network (Internet, LAN or WAN).

 

 

 

 

 

 

 

 

CPO-RX

900 MHz Wireless Receiver

Description

The CPO-RX Wireless Receiver is used in conjunction with other CaptureONE wireless devices; the CPO-TX, a wireless pulse-counting meter that stores and transmits metered pulses from a variety of utility metering devices and the CPO-RP (Signal Repeater) that receives, amplifies, and retransmits signals from CPO-TX devices and other CPO-RPs.

 

 

 

 

 

 

 

 

 

CPO-TX

900MHz Wireless Transmitter

Description

The CPO-TX is a wireless pulse-counting meter that stores and transmits metered pulses from a variety of utility metering devices.  Typical metered devices include Western CPO-RTC runtime family of products in addition to water, electric and gas submeters.

 

 

 

 

 

 

 

 

CPO-RP

900MHz Wireless Repeater

Description

For distances in excess of the CPO-TX transmitter’s range, and accounting for physical structure of the building(s) in which the system is installed, CPO-RP signal repeaters are installed during initial installation.  Open field range of the CPO-RP repeater is 4 miles. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CPO-RTC-TX

Digital Run-Time Converter

Description

The CPO-FP-TX device monitors, calculates and decodes run-time of a fireplace or other switch-controlled device not equipped with electric or electronic controls. The device stores partial cycle until next operating period in non-volatile memory and adds it to the next cycle to prevent loses of accountable time.  The CPO-FP-TX is equipped with a CaptureONE or Inovonics compatible pulse counting transmitter for automatic meter reading.  It also contains an interface replay for monitoring and controlling fireplaces with no power, providing an isolated loop-back to the gas valve and control input from the wall switch.

 

 

 

 

 

 

 

 

CPO-RTC 

Digital Run-Time Converter

Description

The CPO-RTC device monitors, calculates and decodes run-time of a constant running device or circuit such as a gas or water valve, motor, machine, current switch, pressure switch, limit switch, light switch, etc. and converts the data into an accurate, periodic pulse output for connection to data storage and reporting devices. The device stores partial cycle until the next operating period in non-volatile memory and adds it to the next cycle to prevent loses of accountable time.

 

 

 

 

 

 

CPO-RTC-Temp

Digital Run-Time Converter with temperature verification

Description

The CPO-RTC-Temp device monitors, calculates and decodes run-time of a constant running device or circuit such as a gas or water valve, motor, machine, current switch, pressure switch, limit switch, light switch, etc. and converts the data into an accurate, periodic pulse output for connection to data storage and reporting devices. The device stores partial cycle until the next operating period in non-volatile memory and adds it to the next cycle to prevent loses of accountable time.

The exclusive temperature sensor provides instant on/off and activation verification for non-physically connected appliances.  It is useful in those applications when control voltage is not available for monitoring of valves and on hydronic systems to verify the presence of heat or cooling in the pipe before starting the timer.

 

 

 

 

 

 

 

 

 

 CPO-MM-1(2) series

 

 For your electric submetering needs contact one of the following:

 

 

 

Or, contact us directly.

 

 

 

 

 

HOME